Letoto la TZSA Compact Slurry Pump
Tšebeliso le likarolo:
Mofuta oa TZSA pumps are cantilevered, horizontal, centrifugal slurry pumps.Li loketse bakeng sa ho fana ka li-slurries tse fokolang, tse fokolang haholo bakeng sa mafapha a metallurgical, merafo, mashala le thepa ea ho haha.The shaft seal is adopted both gland seal le centrifugal seal.
Lipompo tsa mofuta oa TZSA li sebelisoa ka lebelo le phahameng, kahoo li na le sebaka se senyenyane sa ho boloka fatše. , li-impellers tsa lipompo tse nang le diallo dia ka holimo ho 550mm.) Boemo ba ho ntša ka kopo bo ka 'na ba potoloha li-angles tse 8 tse fapaneng ka hare ho likhato tse 45 bakeng sa ho kenya le ho kenya kopo.
Likarolo Tse Metsi
Liner- mefuta e mengata e fapaneng ea likhetho tsa metallurgic le elastomeric (tšepe le elastomer li ka feto-fetoha) - mochine o sebetsang oa sehokelo o entsoeng ka boenjineri ho casing ka liboutu tse khoele ho fapana le sekhomaretsi se sa tšepahaleng.
Impeller- litekanyetso tse phahameng tsa ts'ebetso (ho fihlela ho 90+%) - ho pompa li-vanes ka morao le ka pele (ka li-impellers tse koetsoeng) ho fokotsa ho potoloha ka har'a pompo, le ho thusa ho thibela tšilafalo ea tiiso
Sehlahla sa 'metso- mefuta e mengata e fapaneng ea likhetho tsa metallurgic le elastomeric (tšepe le elastomer li ka fapanyetsanoa) - li ka fetoloa ka li-cotters ho ikarabella bakeng sa ts'ebetso ea nako le ho eketsa ts'ebetso.
Shaft tiiso
Setiiso sa Expeller(Centrifugal Seal) - E fumaneha ka likhetho tsa metsi a phallo e tlase kapa ho phalla ha zero (grease lubricated) ho fana ka tiiso e ikhethang moo kenyelletso ea metsi ho tiiso e sa mamelleheng kapa e fokolang.
Stuffing Lebokose- Ho tiisa lesela ka ho paka le lesale la mabone.
Bearing kopano- Li-bearings tsohle tse kopantsoeng ka li-bearings tsa boleng bo phahameng ka ho fetisisa tse tapered tapered roller libakeng tse laoloang ho thibela ts'ilafalo le tšilafalo ea matlo - li-diameter tse fetang tekano tsa shaft le ho fokotseha ho feteletseng qetellong ea metsi li kenya letsoho bophelong bo bolelele le ho tšepahala tšimong.
Pump Casing - Moralo o arohaneng o lumella ho fihlella habonolo le ho lokisoa ha likarolo tse metsi - tšepe ea ductile e nang le likhopo tsa kantle e fana ka litekanyetso tse eketsehileng tsa khatello le ts'ebeletso e tšepahalang ha nako e ntse e ea.
Motheo oa Frame- Foreimi e le 'ngoe e matla haholo e beha mofuta oa cartridge le kopano ea shaft.Mochini oa ho fetola li-impeller o ka ntle o fanoa ka tlase ho ntlo ea ho beha bakeng sa ho lokisoa habonolo ha tumello ea impeller.
Sets'oants'o sa Sebopeho:
Chate ea Khetho:
Lethathamo la Ts'ebetso:
| Mofuta | Bokhoni ba Q(m3/h) | Hlooho H(m) | Lebelo (r/min) | Max.eff. (%) | NPSHr(m) |
| 20TZSA-PA | 2.34-10.8 | 6-37 | 1400-3000 | 33 | 2-4 |
| 50TZSA-PB | 16.2-76 | 9-44 | 1400-2800 | 56 | 2.5-5.5 |
| 75TZSA-PC | 18-151 | 4-45 | 900-2400 | 57 | 2-5 |
| 100TZSA-PD | 50-252 | 7-46 | 800-1800 | 61 | 2-5 |
| 150TZSA-PE | 115-486 | 12-51.5 | 800-1500 | 66 | 2-6 |
| 200TZSA-PE | 234-910 | 9.5-40 | 600-1100 | 74 | 3-6 |
| 250TZSA-PE | 396-1425 | 8-30 | 500-800 | 75 | 2-10 |
| 300TZSA-PS | 468-2538 | 8-55 | 400-950 | 77 | 2-10 |
| 350TZSA-PS | 650-2800 | 10-53 | 400-840 | 79 | 3-10 |
| 400TZSA-PST | 720-3312 | 7-51 | 300-700 | 81 | 2-10 |
| 450TZSA-PST | 1008-4356 | 9-42 | 300-600 | 81 | 2-9 |
| 550TZSA-PTU | 1980-7920 | 10-54 | 250-475 | 84 | 4-10 |
| 650TZSA-PU | 2520-12000 | 10-59 | 200-425 | 86 | 2-8 |
| 750TZSA-PUV | 2800-16000 | 6-52 | 150-365 | 86 | 2-8 |
