Products
-
TZS\TZHS Series Heavy Duty Slurry Pump
Independent design
A variety of frame forms(grease or dilute oil)
A variety of impeller structure
A variety of materials
-
TZPC/CH High Head Microtunneling Feed Slurry Pump
Product Parameters
Capacity (m3/h): 15~580
Head(m): 10~130
Pump outlet diameter(mm): 65~300
-
SiC Ceramic Heavy Duty Slurry Pump
– Abrasion resistant
– Corrosion resistant
– Stand temperature up to 120 °C
– shockproof, anti impact
– compative price -
Horizontal Single-stage End-suction Centrifugal Pump
Operation limits
-
DG(H)KB100 Narrow Pipe Jacking Relay Pump
Feature of Product:
A curved outlet structure to the rear of the pump reduces the volume of the pump and enables it to be inserted into the jacking tube(Hi-chrome white iron) wear parts
Large channel, can reach only one blade
Fused carbide coated wear resistant shaft sleeve
The base is equipped with wheels so that the pump can move freely in the narrow jacking tube
Split Stuffing Box (ease of maintenance)
Fused Carbide Coated Wear Resistant Shaft Sleeve
New type Hi- Seal, less shaft seal leakage
-
High Manganese Crusher Plate Arms
Mn18cr2 High Manganese Steel
Heavy-Duty Cast Manganese/Chrome Steel Jaw Plates
OEM Crusher Parts Manufacturers
-
Liquid Ring Vacuum Pump
- It adopts a single-stage and single-acting structure.
- It features the following advantages:
- Simple structure
- Convenient maintenance
- Reliable operation
- High efficiency
- Energy saving
- Higher vacuum degree
- Its performance (especially vacuum degree) is much better than that of SK, 2SK, and SZ series products currently available in the domestic market.
-
4/3 6/4 8/6 10/8 12/10 14/12 16/14 18/16 20/18 Horizontal Slurry Pump Rubber Parts
Compared with metal lining, rubber lining has lower cost. It has good wear resistance and other properties when conveying slurry without sharp particles, and has advantages in wear resistance. In the working condition, the rubber lining is suitable for the slurry without sharp particles. The sharp particles can quickly cut the rubber, so that its life is seriously shortened. The acid and alkali resistant rubber is better than metal.
-
Crusher wear parts :Bi-metal Crusher Hammer
Crusher parts we produce
Crusher hammer
Impact crusher blow bar
Jaw crusher jaw plate
Crusher liner
Grate plate
Mill liner
-
Ceramic Slurry Pump Parts
Ceramic Slurry Pump Parts: The impeller is the main rotating componenwhich normally has vanes to impart and direct the centrifugal force to the liquid. Closed Impeller Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region. Efficiency Francis Vane Some advantages of the Francis vane profile are the higher efficiency, improved suction performance and slightly better wear life in certain types of slurry because the incidence angle to t... -
OEM IMPELLER
♦ 01. Molding ♦ 02. Pouring molten iron. ♦ 03. Remove the casting from the mold. ♦ 04. Sand Blasting + Machining. ♦ 05. Surface Treatment. ♦ 06. Testing. ♦ 07. Packing and Shipping. -
TZR Rubber Lined Slurry Pump
Name: TZR Rubber Lined Slurry Pump
Pump Type: Centrifugal
Power: Motor/Diesel
Discharge Size: 1-18 inch
Capatiy:0-1000(l/s)
Head:0-70m
