High Quality for Zb3a-12 2.2kw Ss304 Ss316L Single Lobe Rotor Pump

Short Description:

 

Material: 304/316L/HT200
DN: 20mm-300mm
PN: 16bar
Q: 2m³/h-1000m³/h
H: 5m-80m
T: -50°C-260°C
P: 0.37kw-250kw

 


Product Detail

Product Tags

The very abundant projects administration experiences and 1 to just one provider model make the higher importance of company communication and our easy understanding of your expectations for High Quality for Zb3a-12 2.2kw Ss304 Ss316L Single Lobe Rotor Pump, We can do your custom-made get to fulfill your own satisfactory! Our company sets up several departments, including output department, revenue department, excellent control department and sevice center, etc.
The very abundant projects administration experiences and 1 to just one provider model make the higher importance of company communication and our easy understanding of your expectations for China 2.2kw Rotor Pump and Lobe Rotor Pump, With the spirit of “high quality is our company’s life; good reputation is our root”, we sincerely hope to cooperate with customers from at home and abroad and hope to build a good relationship with you.

IH Chemical Pump  General Description

IH series pump is a single suction and single stage cantilever centrifugal one for chemical industry use, which adopts an international standard, being in conformity with the standards in ISO2858、ISO3069、ISO3661. This product is confirmed by the Mechanical Industry Department of the state to take place F type corrosion – resisting centrifugal pump (above 50 diameter)for it is an energy – saving novel product. Its efficiency is 3~5% higher than F type pump, the cavitation residual volume is superior and sucking function is fine, which is suitable to convey the liquid with erosion, being able to apply on the departments of chemical industry, petroleum, metallurgical industry, paper making, food, pharmaceutical industry and compound fabric industry etc.

Specifications: Capacity: 6.3~1150m3/h, Head: 5~125m

Working pressure: ≤2.5MPa,i.e. intake pressure + head≤2.5MPa,Casting iron material: ≤1.6 MPa

Working temperature: -20℃~80℃

The meaning of the model: IH80-50-200A

IH—A series of international standard chemical industry centrifugal pump

80—Inlet diameter 80mm

50—Outlet diameter 50mm

200—Nominal diameter of impeller 200mm

IH Chemical Pump Feathers of Structure

The pump consist of pump casing, impeller, sealing ring, pump cover, shaft and bearing house etc. The pump adopts a structure of rear-door, for facilitating maintenance without dismantling pipe system of inlet and outlet. Much convenience in application.

The pump casing is designed with feet below, and discharge is positioned upward, suction in the axial.

The size of the pump flange adopts GB9113.3-88(1.6MPa),equivalent to HG20595-97(1.6MPa).

Rotor part is supported by rolling bearings, the bearing uses N32 machine oil for lubrication, if you want to use grease for lubrication, please make a note in the ordering.

The impeller nuts adopt steel spacer for preventing loose, which can effectively prevent loose and misplace of the impeller nuts due to the vibration in the operation and reverse rotation.

Oil meter adopts automatic making-up type, so to guarantee the lubrication during operation, thus raising up the lifetime of the pump.

Viewing from the end of driver, the rotation direction of the pump is in clockwise.

The material of parts which contact with liquid are made by 1Cr18Ni9、1Cr18Ni9Ti、1Cr18Ni12Mo2Ti、304、304L、316、316L、904、alloy 20#、CD4MCu、Hastelloy alloy etc. we can also adopt the other corrosion-resistance materials according to user’ s requirement.

IH Chemical Pump Shaft Sealing

The shaft sealing adopt with stuffing sealing, single mechanical sealing, or double –end mechanical sealing. In case that the pump suction pressure is bigger, it is advised to select balance mechanical sealing.

The stuffing sealing is used in the case that the requirement for site in clearance is not strict and a little leakage is permissible. Or in case that the liquid conveyed is easily crystallized or contained with grain, it is also advised to use stuffing sealing.

The mechanical sealing is characterized by the function reliable, leakage less and life time longer. It divides single mechanical sealing and double mechanical sealing. In which the double mechanical sealing is suitable to apply on the occasions in high temperature, being flammable, easily blasting, and easily volatilizing poisonous agent and with strong erosion, with suspending particles, easily crystallized and with fabric agent.

There sets up an automatic flush device in the inside of single mechanical sealing. Whereas the double mechanical sealing needs connecting with the outside for flush liquid, which is various in degree due to the difference in pumping liquid, temperature and pressure etc. working conditions. The flush liquid takes clear water or medium pumped. In case that the temperature of the agent is high or contained with grain, it should conduct cooling proceed to the agent first, after filtering then getting through into sealing cavity.

The pressure of washing liquid should be 0.05~0.1MPa higher than the pressure in the front of sealing cavity. Before starting the pump, it needs to open washing and cooling system at first, and not to cut off that system before stopping operation.

Flush liquid pressure: Pump suction pressure + Head×45%

(Maximum not above 0.8MPa for unbalance mechanical sealing)

冲洗液温度 Flush liquid temperature:<40℃

冲洗液流量按下表 Flush liquid capacity:

机械密封规格(mm)

Mechanical seal specification

<45

45~60

60~80

冲洗液流量(升/分)

Flush liquid capacity(L/m)

4

5

6

IH Chemical Pump Performance Table:

N Model Rev=2900r/min   Medium density=1000kg/m³
Flow Pump head η Inlet Outlet Npsh Power Weight
(m³/h) (m) (%) (mm) (mm) (m) (kW) (kg)
1 IH25-20-125 2 20 27 φ25 φ20 2 0.75 55
2 IH25-20-160 2 32 25 φ25 φ20 2 1.1 60
3 IH25-20-200 2 50 22 φ25 φ20 2 2.2 85
4 IH32-20-125 3.6 20 32 φ32 φ20 2 1.1 60
5 IH 32-20-160 3.6 32 30 φ32 φ20 2 1.5 70
6 IH32-20-200 3.6 50 27 φ32 φ20 2.5 3 100
7 IH40-25-125 6.3 20 39 φ40 φ25 2.5 1.5 65
8 IH40-25-160 6.3 32 36 φ40 φ25 2.5 2.2 75
9 IH40-25-200 6.3 50 32 φ40 φ25 2.5 5.5 120
10 IH40-25-250 6.3 80 28 φ40 φ25 2.5 7.5 165
11 IH50-32-125 12.5 20 50 φ50 φ32 2.5 2.2 70
12 IH50-32-160 12.5 32 48 φ50 φ32 2.5 4 120
13 IH50-32-200 12.5 50 45 φ50 φ32 2.5 7.5 155
14 IH50-32-250 12.5 80 39 φ50 φ32 2.5 11 220
15 IH65-50-125 25 20 62 φ65 φ50 2.5 3 85
16 IH65-50-160 25 32 58 φ65 φ50 2.5 5.5 135
17 IH65-40-200 25 50 52 φ65 φ40 2.5 11 190
18 IH65-40-250 25 80 49 φ65 φ40 2.5 15 250
19 IH80-65-125 50 20 66 φ80 φ65 3 5.5 105
20 IH80-65-160 50 32 64 φ80 φ65 3 11 170
21 IH80-50-200 50 50 60 φ80 φ50 3 15 210
22 IH80-50-250 50 80 56 φ80 φ50 3.5 30 360
23 IH100-80-125 100 20 73 φ100 φ80 3.5 11 175
24 IH100-80-160 100 32 69 φ100 φ80 3.5 15 215
25 IH100-65-200 100 50 65 φ100 φ65 3.5 30 350
26 IH100-65-250 100 80 62 φ100 φ65 4 45 480
27 IH125-80-160 160 32 70 φ125 φ80 4 30 410
28 IH125-100-200 200 50 69 φ125 φ100 4.5 55 590
N Model Rev=1450r/min   Medium density=1000kg/m ³
Flow Pump head η Inlet Outlet Npsh Power Weight
(m³/h) (m) (%) (mm) (mm) (m) (kW) (kg)
1 IH25-20-125 1 5 24 φ25 φ20 2 0.37 51
2 IH25-20-160 1 8 22 φ25 φ20 2 0.37 56
3 IH25-20-200 1 12.5 20 φ25 φ20 2 0.55 68
4 IH32-20-125 1.8 5 28 φ32 φ20 2 0.37 55
5 IH32-20-160 1.8 8 27 φ32 φ20 2 0.55 60
6 IH32-20-200 1.8 12.5 23 φ32 φ20 2.5 0.55 80
7 IH40-25-125 3.2 5 35 φ40 φ25 2.5 0.37 58
8 IH40-25-160 3.2 8 33 φ40 φ25 2.5 0.55 65
9 IH40-25-200 3.2 12.5 30 φ40 φ25 2.5 1.1 88
10 IH40-25-250 3.2 20 25 φ40 φ25 2.5 1.1 115
11 IH50-32-125 6.3 5 45 φ50 φ32 2.5 0.55 60
12 IH50-32-160 6.3 8 42 φ50 φ32 2.5 0.55 70
13 IH50-32-200 6.3 12.5 38 φ50 φ32 2.5 1.1 90
14 IH50-32-250 6.3 20 34 φ50 φ32 2.5 1.5 140
15 IH65-50-125 12.5 5 57 φ65 φ50 2.5 0.55 64
16 IH65-50-160 12.5 8 53 φ65 φ50 2.5 1.1 78
17 IH65-40-200 12.5 12.5 46 φ65 φ40 2.5 1.5 100
18 IH65-40-250 12.5 20 43 φ65 φ40 2.5 2.2 165
19 IH80-65-125 25 5 62 φ80 φ65 2.8 1.1 85
20 IH80-65-160 25 8 59 φ80 φ65 2.8 1.5 97
21 IH80-50-200 25 12.5 55 φ80 φ50 2.8 2.2 115
22 IH80-50-250 25 20 53 φ80 φ50 2.8 4 185
23 IH100-80-125 50 5 65 φ100 φ80 3 1.5 110
24 IH100-80-160 50 8 61 φ100 φ80 3 2.2 140
25 IH100-65-200 50 12.5 57 φ100 φ65 3 4 260
26 IH100-65-250 50 20 54 φ100 φ65 3 7.5 330
27 IH125-80-160 80 8 68 φ125 φ80 3.2 4 280
28 IH125-100-200 100 12.5 65 φ125 φ100 3.5 7.5 330
29 IH125-100-250 100 20 70 φ125 φ100 3.5 11 360
30 IH125-100-315 100 32 67 φ125 φ100 3.5 18.5 430
31 IH125-100-400 100 50 64 Ф125 Ф100 3.8 37 520
32 IH150-125-250 200 20 74 φ150 φ125 3.8 22 460
33 IH150-125-315 200 32 69 φ150 φ125 4 45 580
34 IH150-125-400 200 50 66 φ150 φ125 4 75 760
35 IH200-150-250 400 20 76 φ200 φ150 4.2 55 590
36 IH200-150-315 400 32 73 φ200 φ150 4.5 75 820
37 IH200-150-400 400 50 70 φ200 φ150 4.5 110 1080
38 IH250-200-250 650 20 78 Ф200 Ф150 4.5 75 940
39 IH250-200-315 650 32 75 Ф200 Ф150 4.8 110 1160
40 IH250-200-400 650 50 72 Ф200 Ф150 5 132 1380
41 IH300-250-250 1000 20 79 Ф300 Ф250 5.5 110 1320
42 IH300-250-315 1000 32 77 Ф300 Ф250 6 160 1750
43 IH300-250-400 1000 50 74 Ф300 Ф250 6 250 2380

IH 化工泵介绍 IH 化工泵明细_副本 化工泵应用领域_副本

The very abundant projects administration experiences and 1 to just one provider model make the higher importance of company communication and our easy understanding of your expectations for High Quality for Zb3a-12 2.2kw Ss304 Ss316L Single Lobe Rotor Pump, We can do your custom-made get to fulfill your own satisfactory! Our company sets up several departments, including output department, revenue department, excellent control department and sevice center, etc.
High Quality for China 2.2kw Rotor Pump and Lobe Rotor Pump, With the spirit of “high quality is our company’s life; good reputation is our root”, we sincerely hope to cooperate with customers from at home and abroad and hope to build a good relationship with you.

Disclaimer: The intellectual property shown on the listed product(s) belongs to third parties. These products are only offered as examples of our production capabilities, and not for sale.
  • Previous:
  • Next:

  • Write your message here and send it to us