China Best 10/8 Slurry Pump Factories Pricelist - BL series Slurry Pump – Boda
China Best 10/8 Slurry Pump Factories Pricelist - BL series Slurry Pump – Boda Detail:
pplication and Features:
Type BL pumps are cantilevered, horizontal, centrifugal slurry pumps.They are suitable for delivering low abrasive, low density slurries for metallurgical, mining, coal and build material departments.The shaft seal is adopted both gland seal and centrifugal seal.
Type BL pumps are adopted high speed operating and so they have small volumes saving floor area.The frame plates have changeable, wear-resistant, metal liners or rubber liners and the impellers are made of wear-resistant metal or rubber (Rubber for frame plates, impellers of pumps with discharge dia. above 550mm.) The discharge position by request may be rotated 8 different angles at internal of 45 degrees for installation and application.
Wetted Parts
Liners – wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) – active engineered attachment mechanism to casing via threaded bolts as opposed to unreliable glue
Impeller – higher efficiency rates (up to 90+ %) – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination
Throat bush – wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) – adjustable via cotters to account for wear over time and increase efficiency
Shaft seal
Expeller Seal(Centrifugal Seal) – Available with low flow water flush or zero flow (grease lubricated) options to provide exceptional sealing where water introduction to the seal is intolerable or limited.
Stuffing Box – Gland sealing with packing and lantern ring.
Bearing assembly - All bearings assembled with highest quality tapered roller bearings in controlled environments to prevent lubricant and housing contamination – oversized shaft diameters and reduced overhang in the wet end contribute to long life and reliability in the field
Pump Casing – Split-case design allows for ease of access and maintenance on wet end parts – cast ductile iron with exterior ribbing provides increased pressure ratings and reliable service over time
Frame Base – A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Structure Drawing:
Selection Chart:
Performance Table:
Model | Allowable Max. Power(kw) | Clear Water Performance | ||||||
capacity Q | Head H(m) | speed n(r/min) | Max.eff. η% | NPSH (m) | Impeller Dia (mm) | |||
m3/h | l/s | |||||||
BL-20A | 7.5 | 1.8-9 | 0.5-2.5 | 7-35.5 | 1400-3000 | 40 | 2.5-3 | 152 |
BL-50B | 15 | 11.5-65 | 3.2-18 | 8.5-46 | 1400-2800 | 62 | 2.5-5.5 | 190 |
BLR-50B | 15 | 9-61 | 2.5-17 | 3-32.4 | 1200-2600 | 48 | 2.75-4.5 | 190 |
BL-75C | 30 | 21.6-137 | 6-38 | 7-46.4 | 900-2400 | 57 | 3-6 | 229 |
BR-75C | 30 | 28.8-155 | 8-43 | 9-43 | 1100-2300 | 60 | 3-5 | 229 |
BL-100D | 60 | 46.8-324 | 13-90 | 7-48.3 | 800-1800 | 64 | 2.5-6 | 305 |
BLR-100D | 60 | 54-288 | 15-80 | 12-38 | 800-1600 | 65 | 2.5-5.5 | 305 |
BL-150E | 120 | 126-569 | 35-158 | 11-52 | 800-1500 | 60 | 2.5-6 | 381 |
BR-150E | 120 | 72-576 | 20-160 | 4-38 | 800-1300 | 65 | 2.5-5.5 | 381 |
BL-200E | 120 | 72-1080 | 20-300 | 8-45 | 500-1100 | 74 | 3-6 | 457 |
BL-250E | 120 | 144-1800 | 40-500 | 6-48 | 500-1000 | 73 | 3-10 | 550 |
BL-300S | 560 | 568-2538 | 130-705 | 8-60 | 400-950 | 79 | 2-10 | 653 |
BLR-300S | 560 | 432-1900 | 120-528 | 7-41 | 400-800 | 81 | 3-8 | 653 |
BL-350S | 560 | 650-2800 | 180-780 | 10-59 | 400-840 | 81 | 3-10 | 736 |
BLR-350S | 560 | 720-2844 | 200-920 | 10-41 | 400-700 | 86 | 3-7 | 736 |
BL-400S | 560 | 756-3312 | 210-920 | 7-37.5 | 300-600 | 85 | 2-8 | 825 |
BLR-400S | 560 | 720-3312 | 200-920 | 7-51 | 300-700 | 80 | 2-10 | 825 |
BL-450ST | 560 | 1080-4356 | 300-1210 | 9-40 | 300-550 | 87 | 3-10 | 933 |
BLR-450ST | 560 | 1008-4356 | 280-1210 | 9-48 | 300-600 | 80 | 2-9 | 933 |
BL-550TU | 1200 | 1980-7920 | 560-2200 | 10-50 | 250-475 | 86 | 4-10 | 1213 |
Note: Quantity range recommended: 50%Q’≤Q≤100%Q’(Q’ Appropriate to capacity at highest efficiency point).2.NPSH: appropriate to point Q recommended at highest speed.
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of China Best 10/8 Slurry Pump Factories Pricelist - BL series Slurry Pump – Boda , The product will supply to all over the world, such as: Berlin, Qatar, Zambia, We take measure at any expense to achieve essentially the most up-to-date equipment and approaches. The packing of nominated brand is our a further distinguishing feature. The products to assure years of trouble-free service has attracted a great deal customers. The solutions are obtainable in improved designs and richer assortment, they're created scientifically of purely raw supplies. It readily available in a variety of designs and specifications for your selection. The most recent kinds are a great deal better than the preceding one particular and they are quite popular with lots of prospects.
By Lulu from Chile - 2018.02.08 16:45
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Chris Fountas from Lisbon - 2018.05.22 12:13