One should always check the pump and motor temperature rise

Stop:

1 , Closed pressure line valve .

2 , The motor is stopped .

3 , Close the suction line valve .

4 , When the ambient temperature is below the freezing point of the liquid to the pump memory was exhausted .

5 , If the pump is stopped when the long-term use , should be put in the pump corrosive media net and rinse with water after cleaning, to keep .

Operation :

One should always check the pump and motor temperature rise ,slurry pump manufacturer slurry pump manufacturer bearing temperature rise is mainly required bearing temperature does not exceed 7 3 ℃.

2 , During operation , slurry pump manufacturer found unusual noise and other sounds should be stopped immediately check before running after troubleshooting.

3, Note refueling cup sealing device , the reservoir should be maintained , and replenish ensure lubrication.

FB, AFB chemical pump slurry pump manufacturer is a single-stage single-suction cantilever centrifugal pump corrosion , the company learned the characteristics of various types of pumps 1990s , the use of advanced hydraulic model , the new structure with high strength combined single and double mechanical seal, with high efficiency, compact structure, stable performance, reliable .